Toshiba e-STUDIO200L Service Manual page 229

(4) Detach the cover, arbor and clutch spring
from the shaft, and then take off the separa-
tion roller.
[P] Feed roller
(1) Take off the drawer feeding unit
( P.9-20 "[K] Drawer feeding unit").
(2) Take off the separation roller holder
( P.9-22 "[O] Separation roller").
(3) Remove the clip and take off the feed roller.
[Q] Pickup roller
(1) Take off the drawer feeding unit
( P.9-20 "[K] Drawer feeding unit").
(2) Remove the pickup roller assembly from the
pickup arms. Take off the timing belt and
then take off the pickup roller assembly.
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Cover
Clutch spring
Arbor
Separation roller
Fig. 9-36
One-way clutch
Feed roller
Clip
Fig. 9-37
Timing belt
Fig. 9-38
e-STUDIO200L/202L/203L/230/232/233/280/282/283
9 - 23
Shaft
Arbor
Pickup roller assembly
PAPER FEEDING SYSTEM
9