Power Connection; Water Connection; Connecting Water Hose To The Product - Blomberg KFD4952XD Operating Instructions Manual

Hide thumbs Also See for KFD4952XD:
Table of Contents

Advertisement

Installation

3.4. Power connection

A
WARNING:
or multi sockets in power connection.
B
WARNING:
cable must be replaced by Authorized
Service.
C
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
• Our firm will not assume responsibility for any
damages due to usage without earthing and
power connection in compliance with national
regulations.
• The power cable plug must be easily
accessible after installation.
• Connect the refrigerator to an earthed socket
with 220-240V/50 Hz voltage. The socket must
comprise a 10-16A fuse.
• Do not use multi-group plug with or without
extension cable between the wall socket and
the refrigerator.

3.5. Water connection

(Optional)
A
WARNING:
the water pump (if available) during
connection.
The product's water mains, filter and carboy
connections must be rendered by authorized
service.
Refrigerator / User Manual
Do not use extension
Damaged power
Unplug the product and
The product can be connected to a carboy or
directly to the water mains, depending on the
model. To establish the connection, the water hose
must first be connected to the product.
Check to see the following parts are supplied with
your product's model:
1
3
1. Connector (1 piece): Used to attach the water
hose to the rear of the product.
2. Hose clip (3 pieces): Used to fix the water hose on
the wall.
3. Water hose (1 piece, 5 meter diameter 1/4
inches): Used for the water connection.
4. Faucet adapter (1 piece): Comprises a porous
filter, used for connection to the cold water mains.
5. Water filter (1 piece *Optional): Used to connect
the mains water to the product. Water filter is not
required if carboy connection is available.
3.6. Connecting water
hose to the product
To connect the water hose to the product, follow
the instructions below.
1. Remove the connector on the hose nozzle adaptor
in the back of the product and run the hose
through the connector.
9 / 33 EN
2
4
*5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents