Table of Contents
Advertisement
Installation
3.3. Adjusting the stands
If the product is not in balanced
position, adjust the front adjustable
stands by rotating right or left.
3.4. Power connection
A
WARNING:
extension or multi sockets in
power connection.
B
WARNING:
cable must be replaced by
Authorized Service.
When placing two coolers in
C
adjacent position, leave at least
4 cm distance between the two
units.
• Our firm will not assume
responsibility for any damages due
to usage without earthing and
power connection in compliance
with national regulations.
• The power cable plug must be easily
accessible after installation.
• Connect the refrigerator to an
earthed socket with 110V/6 0 Hz
voltage. The plug must comprise a
10-16A fuse.
• Do not use multi-group plug with or
without extension cable between
the wall socket and the refrigerator.
Refrigerator / User Guide
Do not use
Damaged power
9/23EN
3.5. Connecting the water
hose to the refrigerator
1. Slip the union (b) onto the
water hose (a).
2. Push the water hose
downwards firmly to slip it onto the
water inlet valve (c).
3. Tighten the union (c) by hand to
secure it onto the water inlet valve.
C
Normally, you are not re-
quired to tighten the union with a tool.
However, you can use a spanner or pli-
ers to tighten the union if there is a
leakage
3.6. Connecting the water
line to the water supply
Connect the water line to a water
supply valve. If a valve is not present
or you are not sure, consult a qualified
plumber.
Advertisement
Table of Contents
