Fuel Pressure Relieving - Honda 2004 Odyssey Service Manual

Fuel Pressure Relieving

Before disconnecting fuel lines or hoses, relieve
pressure from the system by loosening the fuel
pulsation damper on top of the fuel rail.
1. Make sure you have the anti-theft codes for the
radio and the navigation system (if equipped), then
write down the frequencies for the radio's preset
buttons.
2. Disconnect the negative cable from the battery.
3. Remove the fuel fill cap.
4. Place a wrench on the fuel pulsation damper (A).
*: The illustration shows '99-01 models.
5. Place a rag or shop towel (B) over the fuel pulsation
damper.
6. Slowly loosen the fuel pulsation damper one
complete turn.
NOTE: Replace all washers whenever the fuel
pulsation damper is loosened or removed.
A
22 N·m
(2.2 kgf·m, 16 lbf·ft)
B
11-215