Setting The Motion Detection Sensitivity; Figure 6-11 Motion Detection Screen - Honeywell HDZ20HD User Manual

Configuring Alarms | 97
Figure 6-11 Motion Detection Screen
Moving the Motion Detection Window
In the Live View screen, click and drag from the center of the motion detection window to the
new location.
Resizing a Motion Detection Window
In the Live View screen, click and drag a corner or drag one of the sides of the motion detection
window to adjust its size and shape.

Setting the Motion Detection Sensitivity

You can set the motion detection sensitivity by adjusting the pixel sampling parameters. The
default pixel interval for sampling is 1 (every pixel in the motion detection area is sampled for
motion). If the sampling interval is set to 3, the system samples every third pixel (vertically and
horizontally) within the motion detection area (see Figure 6-12).
800-11873V4 - A - 07/2014