Alarm Input Settings; Selecting An Alarm Input To Configure; Setting The Alarm Status And Type; Figure 6-4 Alarm Application Settings - Honeywell HDZ20HD User Manual

90 | HDZ Series IP PTZ User Manual

Alarm Input Settings

The alarm input settings are configured in the Events
Each alarm input must be configured separately. Select the alarm input you want to configure,
set the switch to on or off, specify the type (normally open or normally closed), and specify what
actions you want the camera to perform when the selected alarm is triggered (see the following
sections for more information).

Selecting an Alarm Input to Configure

Select an alarm input to begin configuring the alarm settings.
1.
2.

Setting the Alarm Status and Type

You can set the alarm switch to on, off, or by schedule (schedules must be set up to be used
with alarms; see
whether the switch is "normally open" or "normally closed".
1.
www.honeywell.com/security
Figure 6-4 Alarm Application Settings

Navigate to System Events
Under Alarm pin selection, select the alarm input you want to configure, and then click
Edit. The Alarm input options opens for the selected input (see
Schedule Settings on page
Under Alarm setting (see
the following options:
• On to enable the alarm.
• Off to disable the alarm (default setting).
• By schedule to enable the alarm based on a defined schedule (see
Settings on page 128

Application section of the System tab.

Application (see Figure
128). You can specify the alarm type based on
Figure 6-5), in the Alarm switch drop-down list, select one of
for information on setting up a schedule).
6-4).
Figure 6-5).
Schedule