Deleting A Scheduled Time Frame; Storage Settings; Sd Card Storage Management - Honeywell HDZ20HD User Manual

Hdz series ip ptz dome
Hide thumbs Also See for HDZ20HD:
Table of Contents

Advertisement

Deleting a Scheduled Time Frame

1.
2.

Storage Settings

Storage management settings are split between SD card and Network attached storage device
settings. Go to the section corresponding to your selected storage type for more information.

SD Card Storage Management

You can record up to 32 GB of data on a microSDHC card. A microSDHC card of any size
between 8 and 32 GB can be installed into the microSDHC card slot on the back plate of the
camera (see
It is a good practice to format your microSDHC card before using it for the first time.
Checking the Free Space Remaining on the MicroSDHC Card
1.
2.
Formatting the MicroSDHC Card
1.
2.
Note
To use these schedules with camera features such as network failure and/or
motion detection, By schedule must be selected for each of those features when
you are configuring them.
Navigate to System
Schedule (see
Select one of the schedule time frames in the schedule window and click Delete.
Figure 2-5
and
Table 2-3
A microSDHC card must be installed into the slot on the back of the camera (see
Figure 2-5
and
Table 2-3
on
Navigate to System
Storage Management
The amount of free space on the card is listed under Device information.
Navigate to System
Storage Management
Note
Before formatting your microSDHC card, be sure to stop all current recordings
that your camera may be performing (check and stop scheduled recording, and
alarm, motion and network failure recordings that are set).
Click Format in the Device setting area of the SD Card screen.
Figure
7-16).
on
page 29
for the location of the microSDHC card slot).
page
29).
SD Card (see
SD Card (see
Configuring System Settings | 129
Figure
7-17).
Figure
7-17).
800-11873V4 - A - 07/2014

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents