Privacy Mask Settings On Standard Definition Ptz Cameras - Honeywell HDZ20HD User Manual

8.
9.
Editing a Privacy Mask Position
1.
2.
3.
4.
5.
6.
7.
Deleting a Privacy Mask
1.
2.

Privacy Mask Settings on Standard Definition PTZ Cameras

The privacy mask functions in the following sections only apply to HDZ30(X) and HDZ36E(X)
model cameras.
Creating a Privacy Mask
1.
Use the mouse to click and drag one of the edges or corners of the mask to re-size it, as
needed.
Click Add to apply the privacy mask settings that you have entered.

Navigate to PTZ Privacy Mask (see
Under Mask Setting, in the Mask field, type a number for the privacy mask you are editing
(from 1 to 16). Click Edit to begin editing the selected mask.
If needed, you can change the Transparency, and Color values. If you edit one or more of
these values, be sure to click the appropriate Set button to save the changes (see
a Privacy Mask on page 70
Pan, tilt and zoom the camera, as needed, to change the video image viewed by the
camera, if such a change in position is needed to edit the privacy mask.
To change the privacy mask position, use the mouse to click and drag the mask from the
middle of the mask.
To change the privacy mask size and shape, use the mouse to click and drag a corner or
side of the mask.
When the privacy mask is positioned and setup as required, click Edit at the bottom of the
Mask Setting section.
Note Up to a 10 second delay may occur between completion of editing a privacy
mask position and the Edit button becoming available.

Navigate to PTZ Privacy Mask (see
Under Mask Clearing, in the Mask drop-down list, select the number of the privacy mask
that you want to delete, and then click Clear.
Note If you are clearing all privacy masks, it is recommended that you also disable the
privacy mask feature (see

Navigate to PTZ Privacy Mask (see
Figure 5-9).
for more information).
Figure 5-9).
step 2 in Creating a Privacy Mask, page
Figure 5-10).
Configuring PTZ Settings | 71
Creating
70).
800-11873V4 - A - 07/2014