Setting A Motion Detection File Name; Saving The Motion Detection Settings; Network Failure Detection Settings; Setting Up Network Failure Detection - Honeywell HDZ20HD User Manual

Setting a Motion Detection File Name

You can specify a file name format for images uploaded when the motion alarm is triggered.
Choose the format that best meets your requirements.
1.
2.

Saving the Motion Detection Settings

After you have configured the motion detection settings for one of the four motion detection
profiles, click Save. Make sure to click Save before setting up another profile.
Save after you have configured all the motion detection settings for a motion detection profile.
See
Status, page
Sensitivity, page
Detection File Name on page 101

Network Failure Detection Settings

You can set up the camera to send an alarm notification when a network failure is detected. You
can send a message to an FTP or email server, or you can record a video clip to a storage
device.

Setting Up Network Failure Detection

1.
In the File Name field (see
name).
Select one of the following options for the file name format:
• Add date/time suffix to add the date and time in YYMMDD_HHMMSS format (for
example, image120428_034724.jpg).
• Add sequence number suffix (no maximum value).
• Add sequence number suffix up to [number] and then start over, and enter a
value in the number field.
• Overwrite to overwrite an older file with a new file with a static filename.
Selecting a Motion Detection Profile to Configure, page
95, Setting the Motion Detection Window, page
97, Setting the Motion Detection Actions, page

Navigate to System Events
Note The network failure detection Detection Switch is set to Off by default.
Figure 6-11), type a file name (image.jpg is the default file
for more information.

Network failure detection (see
Configuring Alarms | 101
95, Setting the Motion Detection
96, Setting the Motion Detection
98, and Setting a Motion
Figure 6-16).
800-11873V4 - A - 07/2014