Network Settings; Basic Network Settings - Honeywell HDZ20HD User Manual

118 | HDZ Series IP PTZ User Manual

Network Settings

This section contains instructions for assigning the camera a fixed IP address, setting the
camera to automatically obtain a DHCP assigned IP address, enabling PPPoE, configuring
ports, enabling IPv6 address configuration, prioritizing services, and enabling SNMP, UPnP,
and DDNS.

Basic Network Settings

The camera is assigned a dynamic (DHCP) IP address by default. Use the Honeywell Device
Search tool to find the automatically assigned dynamic IP address (refer to
on a Network on page 35
If required, you can assign the camera a fixed (static) IP address. You can also assign a fixed IP
address in the Honeywell Device Search application (see
Camera on page 36
Assigning a Fixed IP Address
If required, you can assign the camera a static (fixed) IP address (or a different fixed IP address).
You can also assign a fixed IP address in the Honeywell Device Search application (see
Assigning a Static IP Address to the Camera on page 36
1.
2.
3.
4.
www.honeywell.com/security
for more information).
for more information).

Navigate to System Network
Select the Use fixed IP address option in the General section of the screen.
Fill in the IP address, Subnet mask, Default gateway, Primary DNS, and Secondary
DNS fields.
Click Save under the PPPoE Password field.
Assigning a Static IP Address to the
for more information).

Basic (see Figure 7-8).
Finding the Camera