Nac (Notification Appliance Circuit) - Honeywell MS-5UD Series Manual

3.5.2 NAC (Notification Appliance Circuit)

PROGRAMMING
The options for the NACs on the control panel main circuit board can be configured by pressing 2
1=INPUT ZONES
while viewing Programming Screen #2. The following screens will be displayed:
2=NACS
3=RELAYS
Programming Screen #1
The Notification Appliance Circuits can be configured independently by pressing 1 for NAC 1, 2
for NAC 2, 3 for NAC 3 or 4 for NAC 4.
To program an NAC circuit, press the number corresponding to the NAC to be programmed. The
following screens will be displayed for each selection:
MS-5UD/MS-10UD Series PN 52626:B 8/01/2008
As an example, the user could quickly enter 'FLR_3_ROOM_305' as follows:
1. The cursor is on the first letter of the Adjective field. Press the zero key twice to display
FLR_3
2. With the cursor on the first letter of the Noun field, press the zero key twice to recall the
display ROOM_304. The cursor automatically jumps from the first to the last letter of the
Noun field
3. With the cursor on the last letter of the Noun field, press the zero key again to increment the
room number to 305
4. Press the Enter key to store the information
1=NAC 1
2=NAC 2
1=ENABLED
2=CODING
1=SILENCE
2=AUTO SILENCE
3=SIL INHIBITED
NACS
3=NAC 3
4=NAC 4
NAC Selection Screen
NAC #
STEADY
NAC Screen #1
NAC #
NAC Screen #2
Programming
YES
YES
NO
NO
67