Phone Line 2; Service Terminal - Honeywell MS-5UD Series Manual

READ STATUS
1=CENTRAL STATION
2=PHONE LINES

3=SERVICE TERMINAL

Read Status Screen #4
MS-5UD/MS-10UD Series PN 52626:B 8/01/2008
4.19.11 Phone Line
Pressing 1 while viewing Read Status Screen #4 will display the following screen:
PRIMARY
SECONDARY
3=SUPERV PHONE LINE
The second and third lines of this screen indicate that both the Primary and Secondary phone lines
have been configured for touchtone dialing operation.
Pressing 1 for Superv Phone Line will cause the following screen to be displayed:
SUPERVISE PHONE LINE

PHONE LINE 2

This screen indicates whether or not Phone Line 2 is being supervised by the DACT. The factory
default setting is Phone Line 2 supervised (Yes).
4.19.12 Service Terminal
Pressing 3 while viewing Read Status Screen #4 will display the following screens:
RING COUNT
The Ring Count is displayed as the first item in the Service Terminal Screen.
PHONE LINES
TCH TNE
TCH TNE
SERVICE TERMINAL
Service Terminal Screen
Operating Instructions
YES
125