Honeywell MS-5UD Series Manual page 64

Programming
Pressing 1 while viewing the Noun/Adjective Screen will cause the following screen(s) to be
displayed. Note that the keyboard down arrow key must be pressed to see all the Adjective
screens. Press the number corresponding to the adjective that is to be used as a descriptor for
the location of the detector currently being programmed. When an adjective has been selected,
it will appear at the top of the display as indicated by the asterisks.
**********************
1=NORTH
2=SOUTH
3=EAST
Adjective Screen #1
**********************
1=WEST
2=FRONT
3=CENTER
Adjective Screen #2
**********************
1=REAR
2=UPPER
3=LOWER
Adjective Screen #3
*********************
1=MAIN
2=FIRST
3=2ND
Adjective Screen #4
64
**********************
1=3RD
2=4TH
3=5TH
Adjective Screen #5
**********************
1=FLOOR1
2=FLOOR2
3=FLOOR3
Adjective Screen #6
**********************
1=FLOOR4
2=FLOOR5
3=ROOM
Adjective Screen #7
MS-5UD/MS-10UD Series PN 52626:B 8/01/2008