Time-Date - Honeywell MS-5UD Series Manual

3.6.4 Time-Date

To program the time and date into the control panel, press 1 while viewing Maintenance Screen #2.
The following display will appear:
PROGRAMMING
1=TIME-DATE
Maintenance Screen #2
To change the time, press 1 to display the following screen:
A flashing cursor will appear on the left side of the display. Enter the four digit number
corresponding to the time (0000 - 1259). When the fourth digit is entered, the cursor will move one
position to the right. Press 1 for AM or 2 for PM to complete entering the time. The display will
return to the Time and Date Screen displaying the new time.
To change the date, press 2 while viewing the Time and Date Screen. The following screen will be
displayed:
A flashing cursor will appear on the left side of the display. Enter the two digit month, two digit
day and four digit year. The cursor will move one position to the right after each entry. When the
fourth digit of the year has been entered, the display will return to the Time and Date Screen which
will show the new date.
To change between 12 hour and 24 hour format, press 3 while viewing the Time and Date screen.
Each press of the 3 key will toggle the display between 12 HR and 24 HR format.
MS-5UD/MS-10UD Series PN 52626:B 8/01/2008
TIME AND DATE
1=TIME
2=DATE 01-01-2001
3=CLOCK FORMAT
Time and Date Screen
ENTER TIME AS 12HRS
:
01:00 AM
1=AM
Time Screen
ENTER DATE
**-**-****
MONTH DAY YEAR
01-01-2001
Date Screen
01:00 AM
12HRS
2=PM
Programming
107