Relays; System Settings - Honeywell MS-5UD Series Manual

Operating Instructions
The resulting screens will display the following information:

4.19.3 Relays

READ STATUS
Pressing 3 while viewing Read Status Screen #1 will display the following screen:
1=INPUT ZONES
2=NACS
3=RELAYS
Read Status Screen #1
This screen allows the operator to view the programmed option for each relay.

4.19.4 System Settings

Pressing 1 while viewing Read Status Screen #2 will display the following screens:
READ STATUS
1=SYSTEM SETTINGS
2=TIMERS
3=DAYLIGHT SAVINGS
Read Status Screen #2
The operator can view the system settings options that have been programmed into the FACP.
120
• Enable/Disable Status
• Coding Selection (Temporal, Steady, etc.)
• Silenceable/Nonsilenceable
• Auto Silence Enable/Disable and time delay (in minutes)
• Silence Inhibit Enabled/Disabled
1=RELAY 1
2=RELAY 2
3=RELAY 3
TROUBLE REMIND
CANADIAN OPTION
CHRGR DISABLE
XXX XXXXX XXXX XXXX
RELAY
ALARM
TROUBLE
SUPERV
SYSTEM SETTINGS
SYSTEM SETTINGS
USER BANNER:
MS-5UD/MS-10UD Series PN 52626:B 8/01/2008
NO
OFF
NO