Creating Scenes In Total Connect; Viewing And Controlling Total Connect Scenes From Tuxedo; Enabling Devices For Total Connect - Honeywell Tuxedo Touch Wi-Fi User Manual

Creating Scenes in Total Connect

Use the Automation section of the dashboard in Total Connect to create up to 20 scenes. Refer to the
Total Connect Online Help Guide for further details and device limitations for creating an automation
scene.
1. Access the Total Connect account and navigate to the Automation module. Click Create New. Enter
a name for the scene, select an icon, and then click on the check boxes for the various device actions
desired for that scene. Set the thermostat, if used, to the desired mode and/or temperature for that
scene. Click Save
Note: Scene triggers and actions created in Total Connect can be edited only from Total Connect.
Scene conditions cannot be programmed through Total Connect.
2. After scenes have been created, follow the Total Connect prompts to synchronize the data with
Tuxedo. Syncing is required before scenes created in Total Connect will display in Tuxedo.

Viewing and Controlling Total Connect Scenes from Tuxedo

Use the Scenes icon to display and control scenes that have been created in Total Connect.
1. From the "Home" screen, press the Automation
Remote button. The screen displays a list of scenes created in Total Connect.
Note: The Local button allows you to view a list of scenes created in Tuxedo and enable/disable
those scenes.
2. To control a Remote scene, select the desired scene, then click the appropriate action (ex. Run).

Enabling Devices for Total Connect

After scenes have been created, follow the Total Connect prompts to synchronize the data with Tuxedo.
Syncing is required before scenes created in Total Connect will display in Tuxedo.
1. From the "Home" screen, press Automation
Management" screen is displayed.
2. Press the TC Enable
displayed.
3. Select the device that you want to enable/disable in Total Connect.
Note: Some devices may need to be enabled after a software upgrade.
4. Press the Save
icon when done.
5. After devices have been enabled for Total Connect, follow the Total Connect prompts to synchronize
the data with Tuxedo. Syncing is required before the enabled devices will display in Total Connect.
Notes:
1. Device IDs for Z-Wave devices could be different on Tuxedo and Total Connect web pages.
2. On Total Connect, the maximum number of supported devices is 40 switches, 3 thermostats, and 4
door locks. Tuxedo supports 232 devices (including the Tuxedo keypads) in the Z-Wave network.
Remote Services (cont'd)
when done.
icon; the "Z-Wave Device Management for Total Connect" screen is
and Scene Setup
> Z-Wave Setup
44
icons, then press the
; the "Z-Wave Device