Routine Care; Time/Date Setup - Honeywell Tuxedo Touch Wi-Fi User Manual

Note: When the "Continue" icon is pressed the message "Touch Screen Disabled for =30 Seconds"
is displayed. During these 30 seconds the touch screen should be wiped clean of fingerprints
using a mild soap solution and a soft cloth. When the counter reaches zero, the window
automatically closes and the touch screen is active.
IMPORTANT: Do not use an abrasive cleaning agent or abrasive cloth when cleaning the keypad or
damage to the touch-screen may occur.
The Emergency screen cannot be accessed while running in the clean screen mode.

Routine Care

Treat the components of your security system as you would any other electrical equipment. Do not
•
slam sensor-protected doors or windows.
Keep dust from accumulating on the keypad and all protective sensors, particularly on motion
•
sensors and smoke detectors.
The keypad case and sensors should be carefully dusted with a dry soft cloth. Do not spray water
•
or any other fluid on the units.
UL Note: Web Server/Hosting is not Listed for use in UL installations.
Remote Arming/Disarming/Programming is not to be used in UL Listed installations.

Time/Date Setup

When the time is set it is stored in the keypad and sent to the control panel when you press Apply and
answer Yes to the following prompt. Additionally, when using the keypad, the panel may download its
time into the keypad periodically after the clock is set (for Vista residential and newer commercial
panels such as Vista 128BPT).
If the Get Time icon is pressed, the keypad downloads the time and date from the control panel and
exits the Set Time & Date screen. Note: This icon
appear with all commercial panels.
Setting Daylight Saving Time
From the "Home" screen, press the Setup
Press the Time/Date Setup
Press the DST
icon if you want daylight saving time to affect your system clock.
Set the "Start DST" time and then the "End DST" time by pressing the Month, Weekend and Hour that
you want DST to start. Press APPLY
Note: If DST On (Daylight Saving Time) is selected, the keypad adjusts for Daylight Saving time at
the month, week and time chosen. Make sure "DST On" is checked to enable this feature.
Setup Menus (cont'd)
icon and then the System setup
icon and enter your Authorized Code.
to save the settings.
37
appears with residential panels and may not
icon.