Video Recording & Event Viewing - Honeywell Tuxedo Touch Wi-Fi User Manual

Using Pictures, Cameras and Videos (Multimedia) (cont'd)
Select Yes to reset the camera to factory default settings.
Restart Camera: Press to restart the camera.
Removing Cameras
To delete a camera, highlight the camera name and press the DELETE
1.
window displays: Select "Yes" to permanently remove the selected device from the list. Note:
Select "Delete All" then select "Discover" to rediscover all devices. Yes or No.
2. To delete all cameras, press the DELETE ALL
to delete all cameras? Yes or No.
Video Recording & Event Viewing
Recording Setup
The camera Recording feature allows you to create a scene for recording two minutes of video events
onto the SD card. The first 15 seconds record the pre-event and the remaining time records the post-
event. Up to four simultaneous video events can be recorded
be associated (automatically) to the
"Critical Events" option is enabled, a maximum of two events is recorded even when the SD card is not
available. If more than two critical events occur, then the older one is replaced by the latest event.
When the SD card reaches full capacity, the SD Card Full
To access the recording feature:
Press the Camera
resolution, fixed quality and frame rate, select from the drop-down list.
Note: When setting the resolution to 640 x 480, the recommended frame rate is 8 frames per sec.
When setting the resolution to 320 x 240, the recommended frame rate is no more than 15
frames per sec.
Press Save when done. This will return you to the "Camera List" screen.
Press the Recording Settings Setup
drop-down list.
Press Save when done.
recording. An SD card is required to store the recordings but if the
, Camera Setup , Camera Settings
icon and select the camera to use for recording from the
icon. A confirmation window displays: Do you want
and the
first four supported cameras will
icon is displayed.
icons. To change the settings for
14
icon. A confirmation