Output Setup Function; More Choices; How To Clear/Hide A Control Panel Message; Advanced System Features - Honeywell Tuxedo Touch Wi-Fi User Manual

Output Setup Function

Tuxedo can activate/deactivate up to 18 pre-defined control panel output functions (if programmed in
the control panel). The Output Setup screen displays Output selections. Control these output functions
by enabling/disabling as follows:
Press the Setup , System setup
Authorized Code.
Press the Output Setup
screen; then press Apply
Press to save the setting.
OK
If the Back
icon is pressed, a confirmation window appears stating:
you want to save new settings?"
Note: This is a local setting for the graphic keypad. If user has the maximum number of keypads on
the system, and wants to disable the same output for all, each keypad needs to be set
individually.

More Choices

How to Clear/Hide a Control Panel Message

The Control Panel Message
Message is displayed, the user has two options; clear the Control Panel Message immediately, or
minimize the window and clear it at a later time.
To clear, press CLEAR and enter your Authorized Code. Once your Authorized Code is accepted, the
Control Panel Message is cleared.
To hide; press HIDE to clear the Control Panel Message later.
Notes:
If the alarm is still present, press CLEAR again and then enter your Authorized Code again.

Advanced System Features

While most of the commonly used security functions are available from the keypad's advanced user
interface, there are some less used, advanced features that can either be accessed through Console
Emulation mode on the keypad or a standard alpha keypad. To use features not supported by the
keypad, refer to your Control Panel User Guide.

Console Emulation Mode

Console Emulation Mode allows you to use a keypad interface just as you would a regular system
keypad. All commands shown in Console Emulation mode can also be executed from a standard alpha
keypad.
Notes:
• It is recommended that you do not use the Console Emulation Mode to enter GOTO commands.
Unsatisfactory operation may result from issuing GOTO commands in Console Emulation.
• Do not press emergency pair keys (1 & *, 3 & #, and * & #), they do not function in the Console
Emulation Mode. The A, B, C, and D icons do function if programmed as panic keys. Check with your
system installer for details.
Using the Security System (cont'd)
and Advanced Setup
icon and select the outputs to display or not display on the Output
. A confirmation window is displayed stating:
Select or
Yes No.
icon alerts the user to a control panel message. When a Control Panel
32
icons. If required, enter your
"Information Settings saved"
"Output Settings changed. Do