Creating A Project; Opening A Project - Honeywell X-618 Commissioning Manual

Creating a Project

The steps for creating a project are as follows:
1. Click the create icon
the X-618 Config software window, as show in Figure 3. The New Project window is displayed,
as shown in Figure 5
Refer to the example shown in Figure 6 to set the Project name, Location, and Subsystem
Name as necessary. The default directory for the project file is in the directory where the
software was installed. This directly path can be changed. Click the icon
the Location path field to select a different directory.
Figure 5 New Project Window
2. Click the OK button to create the project. The window as shown in Figure 6 is displayed.
Figure 6 Created Project Sample

Opening a Project

1. Click the Open icon
the X-618 Config software window. The Open window is displayed.
2. Find and open the project file.
3. Click the Open button. The selected project is then opened.
on the menu bar, or select the menu command Project  Create in
on the menu bar, or select the menu command Project  Open in
at the right side of
9