Range Issues; My Secondary Controller Will Not Upload The Information From The Primary Controller; Frequently Asked Questions (Faq's); How Do Scenes Work - Honeywell Tuxedo Touch Manual

Step-by-Step

Range Issues

You could also have a range issue. There are a few ways that you can fix this problem. As explained in the Z-Wave
Introduction, you are creating a mesh network with your devices. Each device works as a transceiver (most devices,
consult the owners guide to verify). The fixes are:
1. Bring the module closer to the Tuxedo Touch™
2. If this is a hardwired device, you can learn a plug in module into the network and plug it in between the
Tuxedo Touch™ and the hardwired device.
a. The Tuxedo Touch™ will send out the request
b. The plug in module will know that it is not trying to learn in, so it will pass the request along.
My Secondary Controller will not upload the information from the
Primary Controller.
After adding the new Z-Wave device to the primary controller (keypad) you must manually update the secondary
controller. To do so you simply follow the steps above to re-include it. This will force it to pull an upload from the
primary.

How do Scenes Work?

Scenes use a condition, trigger, and action to operate. See the Tuxedo Touch™ Automation Document for more
information.
Back to Table of Contents

Frequently Asked Questions (FAQ's)

- 19 - Updated: 4/20/12