Telnet Command: User - Draytek Vigor2860 series User Manual

[idx][ip address] [mask]
E x a m p
E x a m p
> wol fromWan on
> wol fromWan_Setting 1 192.168.1.45 255.255.255.0
>
T e l n e t C o m m
T e l n e t C o m m
The command is used to create new user account profiles.
User set [-e|-d|-c|-l|-o|-a|-r|-b]
user edit [PROFILE_IDX] [-e|-d|-n|-p|-t|-u|-i|-q|-r|-w|-s|-m|-x|-v]
user account [USER_NAME] [-t|-d|-q|-r|-w]
S y n t a x
S y n t a x
Parameter
set
edit
account
User Set
-e
-d
-a[Profile idx][User
name][IP_Address]
-l all
-l userl
-l ip
-o
-c[user name]
Vigor2860 Series User's Guide
and wake up the LAN client.
This command will allow the user to choose whether WoL
packets can be passed from the Internet to the LAN network
from a specific WAN interface.
It means the index number (from 1 to 4).
These commands will allow the user to configure the LAN
clients that the user may wake up from the Internet through
the use of the WoL packet.
ip address - It means the WAN IP address.
mask - It means the mask of the IP address.
l e
l e
a n d : u s e r
a n d : u s e r
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to configure general setup for the user management.
It means to modify the selected user profile.
It means to
Enable User management function.
Disable User management function.
It means to pass an IP Address.
Profile idx- type the index number of the selected profile.
User name- type the user name that you want it to pass.
IP_Address- type the IP address that you want it to pass.
Show online user.
all – all of the users will be displayed on the screen.
user name – type the user name that you want to view on the
screen.
ip – type the IP address that you want to view on the screen.
It means to show user account information.
e.g.,-o
Clear the user record.
716