Telnet Command: Ip Bindmac - Draytek Vigor2860 series User Manual

Auto adjustment is off
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows users to set IP-MAC binding for LAN host.
ip bindmac on
ip bindmac off
ip bindmac strict_on
ip bindmac show
ip bindmac add [IP][MAC][Comment]
ip bindmac del [IP]/all
S y n t a x D e
S y n t a x D e
Parameter
on
off
strict_on
show
add
del
IP
MAC
Comment
All
E x a m p l e
E x a m p l e
> ip bindmac add 192.168.1.46 00:50:7f:22:33:55 just for test
> ip bindmac show
ip bind mac function is turned ON
IP : 192.168.1.46 bind MAC : 00-50-7f-22-33-55 Comment : just
: i p b i n d m a c
: i p b i n d m a c
s c r i p t i o n
s c r i p t i o n
Description
It means to turn on IP bandmac policy. Even the IP is not in
the policy table, it can still access into network.
It means to turn off all the bindmac policy.
It means that only those IP address in IP bindmac policy table
can access into network.
It means to display the IP address and MAC address of the
pair of binded one.
It means to add one ip bindmac.
It means to delete one ip bindmac.
It means to type the IP address for binding with specified
MAC address.
It means to type the MAC address for binding with the IP
address specified.
It means to type words as a brief description.
It means to delete all the IP bindmac settings.
593
Vigor2860 Series User's Guide