Draytek Vigor2860 series User Manual page 400

Aggregation MSDU
Number of Spatial Streams
(NSS)
Long Preamble
Packet-OVERDRIVE
After finishing all the settings here, please click OK to save the configuration.
Vigor2860 Series User's Guide
reflections for the sensitive digital data. If you choose auto
as guard interval, the AP router will choose short guard
interval (increasing the wireless performance) or long guard
interval for data transmit based on the station capability.
Aggregation MSDU can
sizes.
It is used for improving MAC layer's performance
for some brand's clients. The default setting is Enable.
Setup Number of Spatial Stream for Vigor2860ac and
Vigor2860Vac.
Default value is 2 and connection rate could reach 1.3GBps.
This option is to define the length of the sync field in an
802.11 packet. Most modern wireless network uses short
preamble with 56 bit sync field instead of long preamble
with 128 bit sync field. However, some original 11b
wireless network devices only support long preamble. Click
Enable to use Long Preamble if needed to communicate
with this kind of devices.
This feature can enhance the performance in data
transmission about 40%* more (by checking Tx Burst). It
is active only when both sides of Access Point and Station
(in wireless client) invoke this function at the same time.
That is, the wireless client must support this feature and
invoke the function, too.
Note: Vigor N61 wireless adapter supports this function.
Therefore, you can use and install it into your PC for
matching with Packet-OVERDRIVE (refer to the following
picture of Vigor N61 wireless utility window, choose
Enable for TxBURST on the tab of Option).
Note: * means the real transmission rate depends on the
environment of the network.
386
combine frames with different