Telnet Command: Ip6 Radvd; Telnet Command: Ip6 Mngt - Draytek Vigor2860 series User Manual

>
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows you to enable or disable RADVD server.
Ip6 radvd –s [1|0] [lifetime]
ip6 radvd –V
S y n t a x D e
S y n t a x D e
Parameter
-s
Lifetime
-V
-r
-r [num]
E x a m p l e
E x a m p l e
> ip6 radvd -s 1 1800
> ip6 radvd -V
% IPv6 Radvd Config:
Radvd : Enable, Default Lifetime : 1800 seconds
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows you to manage the settings for access list.
ip6 mngt list
ip6 mngt list [add<index> <prefix> <prefix-length>|remove <index>|flush]
ip6 mngt status
ip6 mngt [http|telnet|ping] [on|off]
S y n t a x D e
S y n t a x D e
Parameter
list
status
add
: i p 6 r a d v d
: i p 6 r a d v d
s c r i p t i o n
s c r i p t i o n
Description
It means to enable or disable the default lifetime of the
RADVD server.
1: Enable the RADVD server.
0: Disable the RADVD server.
It means to set the lifetime.
The lifetime associated with the default router in units of
seconds. It's used to control the lifetime of the prefix. The
maximum value corresponds to 18.2 hours. A lifetime of 0
indicates that the router is not a default router and should not
appear on the default router list.
Type the number (unit: second) you want.
It means to show the RADVD configuration.
It means RA default test.
It means RA test for item [num].
: i p 6 m n g t
: i p 6 m n g t
s c r i p t i o n
s c r i p t i o n
Description
It means to show the setting information of the access list.
It means to show the status of IPv6 management.
It means to add an IPv6 addres which can be used to execute
603
Vigor2860 Series User's Guide