Draytek Vigor2860 series User Manual page 124

WAN Connection
Detection
After finishing all the settings here, please click OK to activate them.
D e t a i l s
D e t a i l s
When Offline is selected, the IPv6 connection will be disabled.
D e t a i l s
D e t a i l s
During the procedure of IPv4 PPPoE connection, we can get the IPv6 Link Local Address
between the gateway and Vigor router through IPv6CP. Later, use DHCPv6 or Accept RA to
acquire the IPv6 prefix address (such as: 2001:B010:7300:200::/64) offered by the ISP. In
addition, PCs under LAN also can have the public IPv6 address for Internet access by means
of the generated prefix.
No need to type any other information for PPP mode.
Below shows an example for successful IPv6 connection based on PPP mode.
Vigor2860 Series User's Guide
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode – Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
P a g e f o r I P v 6 – O f
P a g e f o r I P v 6 – O
P a g e f o r I P v 6 – P P
P a g e f o r I P v 6 – P P
f l i n e i n W A N 1 / W A
f f l i n e i n W A N 1 / W A
P i n W A N 1 / W A N 2
P i n W A N 1 / W A N
110
N 2 / W A N 3 / W A N 4
N 2 / W A N 3 / W A N 4
2