Draytek Vigor2860 series User Manual page 388

Vdsl2 security firewall

Hide thumbs Also See for Vigor2860 series:

Table of Contents

Rate Control

Vigor2860 Series User's Guide

For 5 GHz: At present, the router can connect to 11a Only,

11n Only(5 GHz), Mixed (11a+11n), and Mixed

(11a+11n+11ac) stations simultaneously. Simply choose

Mixed (11a+11n) mode.

In which, 802.11b/g operates on 2.4G band, 802.11a operates

on 5G band, 802.11n operates on either 2.4G or 5G band, and

802.11ac operates on 5G band only.

Means the channel of frequency of the wireless LAN. The

default channel is 6 (for 2.4GHz) / 36 (for 5GHz). You may

switch channel if the selected channel is under serious

interference. If you have no idea of choosing the frequency,

please select Auto to let system determine for you.

Check it to prevent from wireless sniffing and make it harder

for unauthorized clients or STAs to join your wireless LAN.

Depending on the wireless utility, the user may only see the

information except SSID or just cannot see any thing about

Vigor wireless router while site surveying. The system allows

you to set four sets of SSID for different usage. In default, the

first set of SSID will be enabled. You can hide it for your

Means the identification of the wireless LAN. SSID can be

any text numbers or various special characters.

Member –Check this box to make the wireless clients

(stations) with the same SSID not accessing for each other.

VPN – Check this box to make the wireless clients (stations)

with different VPN not accessing for each other.

It controls the data transmission rate through wireless

Upload – Check Enable and type the transmitting rate for

Show Quick Links

Table of Contents