Telnet Command: Ip Session - Draytek Vigor2860 series User Manual

T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows users to set maximum session limit number for the specified IP; set
message for exceeding session limit and set how many seconds the IP session block works.
ip session on
ip session off
ip session default [num]
ip session defaultp2p [num]
ip session status
ip session show
ip session timer [num]
ip session [block/unblock][IP]
ip session [add/del][IP1-IP2][num][p2pnum]
S y n t a x D e
S y n t a x D e
Parameter
on
off
default [num]
Defautlp2p [num]
status
show
timer [num]
[block/unblock][IP]
add
del
IP1-IP2
num
p2pnum
E x a m p l e
E x a m p l e
>ip session default 100
> ip session add 192.168.1.5-192.168.1.100 100 50
> ip session on
> ip session status
: i p s e s s i o n
: i p s e s s i o n
s c r i p t i o n
s c r i p t i o n
Description
It means to turn on session limit for each IP.
It means to turn off session limit for each IP.
It means to set the default number of session num limit.
It means to set the default number of session num limit for
p2p.
It means to display the current settings.
It means to display all session limit settings in the IP range.
It means to set when the IP session block works.
The unit is second.
It means to block/unblock the specified IP address.
Block: The IP cannot access Internet through the router.
Unblock: The specified IP can access Internet through the
router.
It means to add the session limits in an IP range.
It means to delete the session limits in an IP range.
It means the range of IP address specified for this command.
It means the number of the session limits, e.g., 100.
It means the number of the session limits, e.g., 50 for P2P.
591
Vigor2860 Series User's Guide