Draytek Vigor2860 series User Manual page 340

Action
File/Path
Schedule
Now
H o w t o
H o w t o
Follow the steps below to create a new maintenance profile.
1. Click any index number link, e.g., Index 1.
2. The Maintenance dialog appears.
Available parameters are listed as follows:
Item
Profile Name
Enable
Device Name
Action Type
Vigor2860 Series User's Guide
profile will apply to.
Display the action that managed CPE shall accept.
Display the location of the file you want to save, restore or
upgrade for CPE.
Display the schedule profiles selected for such profile.
The action will be performed for the selected CPE
immediately.
a d d a n e w M a i n t e
a d d a n e w M a i n t e
Description
Type the name of the maintenance profile.
Check it to enable such profile.
The drop down list will display all the CPE devices detected
by Vigor2860 series. Choose the one which will be applied
with such new created profile.
There are three actions for you to choose for such profile.


Note: When restoring configuration to a CPE, make
sure the configuration file you selected was backup
from this CPE before. Because restoring from another
device's configuration file may cause serious problem
(e.g., Both devices have different ISP username/
n a n c e P r o f i l e
n a n c e P r o f i l e
Config Backup – It means such profile will be used for
configuration backup of the selected CPE.
Config Restore – It means such profile will be used for
restoring the configuration of the selected CPE.
326