Telnet Command: Vpn Option - Draytek Vigor2860 series User Manual

T e l n e t C o m m
T e l n e t C o m m
This command allows users to configure settings for LAN to LAN profile.
vpn option <index> <cmd1>=<param1> [<cmd2>=<para2> | ... ]
S y n t a x
S y n t a x
Parameter
<index>
For Common Settings
<index>
pname
ena
thr
nnpkt
dir
idle=[value]
palive
For Dial-Out Settings
ctype
Vigor2860 Series User's Guide
a n d : v p n o p t i o n
a n d : v p n o p t i o n
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means the index number of the profile.
Available index numbers:
1 ~ 32
It means the index number of the profile.
It means the name of the profile.
It means to enable or disable the profile.
on – Enable
off - Disable
It means the way that VPN connection passes through.
Available settings are wlf, wlo, w2f, and w2o.
w1f – WAN1 First.
w1o – WAN1 Only.
w2f – WAN2 First.
w2o – WAN2 Only.
It means the NetBios Naming Packet.
on – Enable the function to pass the packet.
off – Disable the function to block the packet.
It means the call direction. Available settings are b, o and i.
b – Both
o – Dial-Out
i – Dial-In.
It means Always on and Idle Time out.
Available values include:
-1 – it means always on for dial-out.
0 – it means always on for dial-in.
Other numbers (e.g., idle=200, idle=300, idle=500) mean the
router will be idle after the interval (seconds) configured
here.
It means to enable PING to keep alive.
-1 – disable the function.
1,2,3,4 – Enable the function and PING IP 1.2.3.4 to keep
alive.
It means "Type of Server I am calling".
690