Dell 3333dn Service Manual page 69

Fax error log codes (Continued)
Error code Description
813 Timeout occurred after waiting too long
to receive a good frame.
814 Tried too many times at selected speed
using V34 modulation scheme.
815 Fax transmission was interrupted due
to power failure.
818 Fax transmission failed due to
insufficient memory to store scanned
image.
819 Fax transmission failed due to
insufficient memory to store received
image.
81A A timeout occurred during transmission
of a page in ECM mode.
880 Failure to transmit training successfully
in V17, V29, V27 terminal modulation
schemes.
881 Failure to transmit training successfully
in V33, V29, V27 terminal modulation
schemes.
882 Failure to transmit training successfully
in V17, V29 terminal modulation
schemes.
883 Failure to transmit training successfully
in V17,V27 terminal modulation
schemes.
884 Failure to transmit training successfully
in V29, V27 terminal modulation
schemes.
885 Failure to transmit training successfully
in V17terminal modulation scheme.
886 Failure to transmit training successfully
in V29 terminal modulation scheme.
887 Failure to transmit training successfully
in V27 terminal modulation scheme.
Action
• Adjust "Receive Threshold".
• Adjust 'Transmit Level'.
• Adjust to a lower modulation scheme.
• Troubleshoot MFP if error persists. See
"Modem / fax card service check" on
page 2-63.
Adjust 'Memory Use' setting to allocate
more memory for send jobs.
Adjust 'Memory Use' setting to allocate
more memory for receive jobs.
Select a lower 'Max Speed' value under
Fax Send settings.
• Select a lower "Max Speed" under Fax
Send settings.
• Adjust the "Transmit Level".
• Check line quality.
• Select a lower "Max Speed" under Fax
Send settings.
• Adjust the "Transmit Level".
• Check line quality.
• Select a lower "Max Speed" under Fax
Send settings.
• Adjust the "Transmit Level".
• Check line quality.
• Select a lower "Max Speed" under Fax
Send settings.
• Adjust the "Transmit Level".
• Check line quality.
• Select a lower "Max Speed" under Fax
Send settings.
• Adjust the "Transmit Level".
• Check line quality.
• Select a lower "Max Speed" under Fax
Send settings.
• Adjust the "Transmit Level".
• Check line quality.
• Select a lower "Max Speed" under Fax
Send settings.
• Adjust the "Transmit Level".
• Check line quality.
• Select a lower "Max Speed" under Fax
Send settings.
• Adjust the "Transmit Level".
• Check line quality.
Diagnostics information
2-33