Left side cover removal
Note:
•
Leave the front door closed when removing the left side cover.
•
Make sure that the fuser cables are out of the way when removing the left side cover.
1.
Remove the scanner front cover. See
2.
Move the scanner assembly to the up position. See
page
4-102.
3.
Remove the plastic screw (A) that secures the left cover to the tub assembly.
4.
Remove the metal screw (B) that secures the left cover to the front of the print engine frame.
5.
Move the MFP to the edge of the table.
6.
Open the front cover slightly.
"Scanner front cover removal" on page
"Lifting the Scanner to the up position" on
A
B
4-31.
4-33
Repair information