Duplex Tests; Quick Test (Duplex) - Dell 3333dn Service Manual

Duplex Tests

Quick Test (duplex)

This test prints a duplex version of the Quick Test that can be used to verify that the correct placement of the
top margin on the back side of a duplex page. You can run one duplexed page (Single), or continue printing
duplexed pages (Continuous) until Stop
"Top Margin (duplex)" on page
Note: Before you set the duplex top margin, be sure to set the registration. See
page 3-18.
The paper you choose to print the page on should be either Letter or A4.
To run the Quick Test (duplex):
1. Touch
2. Touch
•
The single Duplex Quick test cannot be canceled.
•
The printer attempts to print the Quick Test Page from the default paper source. If the default paper
source only supports envelopes, then the page is printed from Tray 1.
•
Check the Quick Test Page for the correct offset between the placement of the first scan line on the
front and back side of a duplexed sheet.
The single test stops automatically when a single duplex sheet is printed, and the continuous test continues
until you press Stop
3-24
Service Manual
3-25.
to select Quick Test from DUPLEX TESTS.
to select Single or Continuous.
.
is pressed. For information about changing the margin, see
"Registration (printer)" on