Fax Error Codes - Dell 3333dn Service Manual

Error
975.xx Unrecognizable network
976.xx Unrecoverable software error in network port
978.xx Bad checksum while programming network port
979.xx Flash parts failed while programing network port
Other errors
980.xx Engine experiencing unreliable communication with the
specified device
981.xx Engine protocol violation detected by the specified
device
982.xx Communications error detected by the specified device
983.xx Invalid command received by the specified device
984.xx Invalid command parameter received by the specified
device
990.xx An equipment check condition has occurred in the
specified device, but the device is unable to identify the
exact component failure.
991.xx The specified device has detected an equipment check
in its system card.

Fax error codes

Fax error log codes
Error code
000
200
3XX
4XX
5XX
6XX
Description
Description
No error occurred during fax
transmission
Error occurred when transmitting
training.
Error occurred when receiving
image data.
Error occurred when sending
image data.
Received unknown response from
remote fax device.
Error occurred when receiving a frame.
Action
Call the next level of support.
Call the next level of support.
Call the next level of support.
Action
No action needed
• Check line quality.
• Select a lower 'Max Speed'.
• value under Fax Send settings
• Adjust the transmit level.
• Check line quality.
• Adjust 'Receive Threshold'.
• Select a lower 'Max Speed' value
under Fax Receive settings.
• Check line quality.
• Adjust 'Transmit Level'.
• Select a lower 'Max Speed' value
under Fax Receive settings.
No action needed. Issue is with the other
device.
• Check line quality.
• Adjust 'Receive Threshold'.
Diagnostics information
2-31