To Disable The User Password Using Icim - Cisco Prisma II Hybrid Amplifier Installation Manual

 To change a digit you have just typed, use the CAN (Cancel) function by
pressing the
5 Press the
show whether your password entry was accepted.

If the new password entry was accepted, you are able to return to the MAIN
menu.

If the new password entry was rejected:
–
–
–
–

To Disable the User Password using ICIM

If a user password has been entered, you may disable it at any time. However, the
current password must be active prior to disabling it. If the current password has
expired (more than 10 minutes have passed since your last keystroke), you must re-
enter the current password before disabling it.
1 Press the
2 Use the
3 Press the
Use the
4
Press the
5
78-4025693-01 Rev D
key. This deletes the last digit typed.
key to input the new password. The ICIM display updates to
Press the key to return to the password entry menu.
Clear all digits using the CAN (Cancel) function.
Re-enter an 8-digit password using only the 0-9 number keys.
Press the key to input the password.
key.
key to scroll down until Password is highlighted.
key.
key to scroll down until Disable Psw is highlighted.
key to select Disable Psw.
ICIM Password
73