Icim Keypad - Cisco Prisma II Hybrid Amplifier Installation Manual

ICIM Keypad

The ICIM keypad has 12 keys for monitoring parameters. The table below lists each
key and briefly describes its function.
Button
78-4025693-01 Rev D
Function
Displays status information for the selected module.
Displays configuration information for the selected module.
Displays all of the parameters in alarm for a selected module.
Moves the menu selection area up.
Moves the menu selection area down.
Selects the highlighted parameter.
Displays ICIM module information such as firmware version and serial
number.
Shifts function of a keypad button to the function or number label just
above that button.
Decreases numerical readings of selected configuration parameters.
Increases numerical readings of selected configuration parameters.
Enters input data (if valid).
Exits the current menu and displays the MAIN menu.
ICIM Front Panel
69