Cisco Prisma II Hybrid Amplifier Installation Manual page 70

Chapter 3 Operation Using CLI
Argument
The following sample dialog illustrates the use of the info command to view the
value and statenames characteristics for the cross control:
*/* MODULE> info control cross value statenames <Enter>
MODID
20/08
SUCCESS!
*/* MODULE>
In the example above, the control's name pattern was explicit (no wildcards). The
details to be listed were Value and the available StateNames (not all controls and
monitors have StateNames). In this case, the value is 0 (False).
44
Details
Downldable
Inactiverev
Mandata
Modtype
Name
Nextimage
Numanalogcontrols
Numcontrols
Numdigitalcontrols
Nummonits
Numofalarms
Scriptrev
Selftest
Serial
Tos
NAME VALUE STATENAMES
Cross False (0) False (0), True (1)
Description
module can be downloaded with new firmware
inactive software image revision for the module
manufacturing data
manufacturing data (alias for MANDATA)
name of module
flash bank where active image resides
number of analog controls
total number of controls
number of digital controls
number of monitored values
number of alarms
script revisions
status of module self test
serial number
time of service
78-4025693-01 Rev D