Connecting The Cisco Bwx360 Wimax Outdoor Modem; Connecting The Outdoor Modem; Connecting A Pc Or Switch - Cisco BWX360 WiMAX User Manual

Wimax outdoor modem

Hide thumbs Also See for BWX360 WiMAX:

Table of Contents

Wall mounting (optional)

Connecting the Cisco BWX360 WiMAX Outdoor Modem

Set up the connections on the indoor unit in the following order:

1. Connect the outdoor modem.

2. Connect the PC or the switch/hub.

3. Connect the indoor unit to the mains power supply and switch all the devices on.

After the outdoor modem has been installed correctly, the associated Ethernet cable

(with RJ45 plug) is available close to the indoor unit.

Insert the Ethernet cable plug into the OUT socket on the indoor unit. You should

be able to hear the clips on the RJ45 plug click into place.

Use either the Ethernet cable that is supplied or a standard network cable

(CAT-5) for the connection to the PC or switch. It does not matter if the

Ethernet cable has straight or crossed wiring.

You must use a shielded Ethernet cable.

Table of Contents