Internet - Cisco BWX360 WiMAX User Manual

Internet

Operating mode
Firmware version
If necessary, click the Refresh button to refresh the data in the status display.
Internet
Status > Internet
The connection settings for your Cisco BWX360 WiMAX Outdoor Modem are dis-
played in the Internet submenu.
Connection status
IP address
Subnet mask
MAC address
Default gateway
DHCP server
36
Role played by your Cisco BWX360 WiMAX Outdoor Modem
during connection setup to the Internet (Router or Bridge).
Version number of the currently installed device software. You
will also need to give your provider this number.
The status of the radio connection with the WiMAX network
is displayed as follows:
connected = The Cisco BWX360 WiMAX Outdoor
Modem has established a radio connection with a
WiMAX network. You will see the connection duration in
brackets and in the format ddd:hh:mm:ss (d=days,
h=hours, m=minutes, s=seconds).
disconnected = The Cisco BWX360 WiMAX Outdoor
Modem is trying to establish a connection with a WiMAX
network.
For an existing Internet connection only:
Displays the public IP address and subnet mask via which
your Cisco BWX360 WiMAX Outdoor Modem establishes
the connection with the Internet.
The MAC address uniquely identifies a network component
within a network, in this case the public MAC address of
your Cisco BWX360 WiMAX Outdoor Modem within the
WiMAX network you use.
For an existing Internet connection only:
Displays the gateway the Cisco BWX360 WiMAX Outdoor
Modem uses for connecting to the Internet.
IP address of the DHCP server with which the
Cisco BWX360 WiMAX Outdoor Modem is connected.
While the Cisco BWX360 WiMAX Outdoor Modem has not
been assigned an IP address by the WiMAX network, the
field stays empty.