Cisco BWX360 WiMAX User Manual page 23

The connection quality can be detected in two different ways:
CINR (Carrier to Interference and Noise Ratio) measures the signal
quality.
RSSI (Received Signal Strength Indication) measures the signal
strength.
The bar indicates either RSSI or CINR values. The used method is pre-
configured by your operator. If RSSI is used the bar is labeled Signal
strength.
When your Cisco BWX360 WiMAX Outdoor Modem is optimally aligned:
Click End to close the Basic Setup Wizard and apply the settings you have made.
Make sure that in future your Cisco BWX360 WiMAX Outdoor Modem is always in the
set position.
Establishing a radio connection with a WiMAX network
23