Advanced Settings - Cisco BWX360 WiMAX User Manual

Wimax outdoor modem

Hide thumbs Also See for BWX360 WiMAX:

Table of Contents

Advanced Settings

In the Advanced Settings menu, you can configure all the options for the

Cisco BWX360 WiMAX Outdoor Modem. If required, you can also change the settings

you made using the Basic Setup Wizard. The following table contains the options avail-

able in this menu.

Operating Mode

Internet

Local Network

WiMAX configuration

Administration

All Advanced Settings pages contain Ok and Cancel buttons.

Click Ok to confirm your entries.

Click Cancel to close a page without applying the changes.

Depending on the pre-configuration of your device some of the menu

entries and configuration possibilities might be missing in your device.

Description

Here you can define whether your Cisco BWX360 WiMAX

Outdoor Modem will be used as a router or a bridge for the

Internet access (page 25).

Here you can configure your Internet access. This menu

covers all setting options for the Internet (page 26).

Here you can configure your local network, e.g. change the

private IP address of the Cisco BWX360 WiMAX Outdoor

Modem or make settings for the DHCP server (page 30).

Here you can change the access data for your WiMAX

access (page 31).

Here you can do various administration tasks, e.g. assign a

system password (page 32) or reset the configuration to the

factory defaults (page 33). You can also load new firmware

(page 34)

Table of Contents