Device Status; Radio Status - Cisco BWX360 WiMAX User Manual

Device status

Device status
Status > Device Status
The device status of your Cisco BWX360 WiMAX Outdoor Modem is displayed in the
Device Status submenu.
System uptime
System time
Operating Mode
Device temperature
System Log
If necessary, click the Refresh button to refresh the data in the status display.

Radio status

Status > Radio Status
Information about the radio connection to the WiMAX network is displayed in the Radio
Status submenu.
Connected to a base station
Indicates whether or not your Cisco BWX360 WiMAX Outdoor Modem is con-
nected to a base station.
Base station ID
ID number of the base station to which the device is connected.
MAC state
Status of the connection setup to the base station. The information shown here is
only intended for technically experienced users. Under Connected to a base sta-
tion is shown whether a connection to a base station exists.
Authentication
Indicates whether an authentication method is used for the WiMAX connection.
Protocol
Protocol used for authentication.
38
Operating time of your Cisco BWX360 WiMAX Outdoor
Modem since it was last restarted. The operating time is given
in the format ddd:hh:mm:ss (d=days, h=hours, m=minutes,
s=seconds).
Displays the current date and time. This information is trans-
mitted to your Cisco BWX360 WiMAX Outdoor Modem by the
WiMAX network.
Role played by your Cisco BWX360 WiMAX Outdoor Modem
during connection setup to the Internet (Router or Bridge).
Current device temperature inside your Cisco BWX360
WiMAX Outdoor Modem. In the event of overheating, the
Cisco BWX360 WiMAX Outdoor Modem switches off.
Error protocol in which you will find information about prob-
lems.