The Home Page - Cisco BWX360 WiMAX User Manual

The Home page

Once you have logged in successfully to the Cisco BWX360 WiMAX Outdoor Modem,
you will see the Home page for the device software. The start screen offers an overview
of all areas of the configuration program:
Menu
Basic Setup Wizard
Advanced Settings
Status
In the area to the right of the start screen, you will see the connection status of your
Cisco BWX360 WiMAX Outdoor Modem:
connected = The Cisco BWX360 WiMAX Outdoor Modem has established a radio
connection with a WiMAX network. You will see the connection duration in brackets
and in the format ddd:hh:mm:ss (d=days, h=hours, m=minutes, s=seconds).
disconnected = The Cisco BWX360 WiMAX Outdoor Modem is trying to establish
a connection with a WiMAX network.
To configure your Cisco BWX360 WiMAX Outdoor Modem, use the Basic Setup Wiz-
ard, which will help you establish a radio connection.
Connecting to the Internet manually
Once you have configured your Internet access (see page 20 and page 26), you can
establish a manual connection to the Internet on the start screen if you have selected
Connect on demand as the Connection mode.
To establish or end an Internet connection manually:
Open the start screen of the Cisco BWX360 WiMAX Outdoor Modem as described
on page 15.
If you have already started the user interface, click the Home tab at the top left of
the window.
Click Connect to establish a connection to the Internet.
Click Disconnect if you no longer require the connection.
Description
Perform the basic configuration and set up the radio
connection to the WiMAX network (see page 20).
Perform advanced configuration and administration
tasks (see page 24).
Obtain information on the status of your Cisco BWX360
WiMAX Outdoor Modem (see page 35).
The Home page
19