Restart; Updating The Firmware - Cisco BWX360 WiMAX User Manual

Wimax outdoor modem

Hide thumbs Also See for BWX360 WiMAX:

Table of Contents

Restart

If the Cisco BWX360 WiMAX Outdoor Modem is not operating properly, you can reboot

it. It should then be ready for use again.

Open the Advanced Settings tab and on the Administration menu select

Restart.

Click Ok to reboot the device.

A window will appear prompting you to confirm the procedure.

Updating the firmware

If your WiMAX provider provides a new downloadable firmware version for your

Cisco BWX360 WiMAX Outdoor Modem with new functions or to fix errors, you can

update your device quickly and easily.

First download the relevant firmware file from the Internet and save it on your PC.

Read the information provided carefully.

Only update the firmware if there is a new version of the firmware that is

currently installed on your device on the Internet. The firmware version

currently installed is shown under Active image version.

Open the Advanced Settings tab and on the Administration menu select Firm-

ware Update.

Enter the path and file name of the firmware file to be installed or click Browse to

select a file on your PC.

Click Ok to start the firmware update.

Do not disconnect your Cisco BWX360 WiMAX Outdoor Modem from the

PC or the power supply during the firmware update, as this could dam-

age the device. It may take up to five minutes before the device is ready

for use again.

Table of Contents