The Cisco Bwx360 Wimax Outdoor Modem; Scope Of Delivery - Cisco BWX360 Installation Manual

Wimax outdoor modem
Hide thumbs Also See for BWX360:
Table of Contents

Advertisement

Cisco BWX360 WiMAX Outdoor Modem / engbt / 253306943 / Product_intro.fm / 07.04.2010

The Cisco BWX360 WiMAX Outdoor Modem

The Cisco BWX360 WiMAX Outdoor Modem

Scope of delivery

1 outdoor modem with integrated antennas
Assembly equipment:
– Distance piece for elevation setting
– Mast bracket with fastening clamps, fastening screws and brackets
Assembly accessories:
– 1 RJ45 plug (Phoenix connector VS-08-RJ45-5-Q/IP67 BK) to connect the
Ethernet cable to the outdoor modem
1 indoor unit
– 1 Ethernet cable for the internal connection to the PC, 1.8 m
– 1 power supply unit
1 assembly instructions
1 user guide
Depending on the installation conditions and customer requirements, you
can also connect the Ethernet cable from the IN connector of the indoor
unit to a standard LAN socket, and RJ45 plug (e.g. Phoenix connector VS-
08-RJ45-5-Q/IP20 BK, see "Sources" on page 24) or a patch panel.
Tools and equipment required
You will require the following tools and equipment for assembly:
Antenna mast with assembly equipment (for mounting on a mast); the antenna
mast must have a diameter of 2–3 inches (50.8 mm–76.2 mm) and be designed for
assembling this kind of antenna.
Sealing material for the wall, window or roof duct
Ethernet cable (non-assembled) for the Ethernet connection to the indoor unit. For
the connection of the outdoor modem to the indoor unit only use a round Ethernet
cable (Ø 6.0-8.5 mm), which is approved for the outdoor use. We recommend to
contact one of the manufacturers which are mentioned in the chapter "Ethernet
cable" on page 24.
RJ45 plug (Phoenix) for the connections required indoors. Also a standard CAT5e
Ethernet cable for connecting indoor units to the PC or router.
LSA+ wall connection socket, feeder tool and standard CAT5e Ethernet cable, if
you wish to connect the Ethernet cable from outside to a wall connection socket.
Cable clamps and cable ties for attaching the Ethernet cable to the antenna mast,
the wall bracket and other outdoor and indoor areas
Ground cable for earthing (grounding) the metal casing of the outdoor modem
(wire: stranded, green, #6 AWG, ROHS; lug: CONN, one-hole #6, ROHS)
4

Advertisement

Table of Contents
loading

Table of Contents