Wps - Draytek Vigor2820 Series User Manual

Clear All
3 . 1 3 . 5 W P S
3 . 1 3 . 5 W P S
WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection
between wireless station and wireless access point (vigor router) with the encryption of
WPA and WPA2.
Note: Such function is available for the wireless station with WPS supported.
It is the simplest way to build connection between wireless network clients and vigor router.
Users do not need to select any encryption mode and type any long encryption passphrase to
setup a wireless client every time. He/she only needs to press the WPS button on AP and
selects that AP on the utility of wireless station. Then WPS will connect for client and router
automatically.
There are two methods to do network connection through WPS between AP and Stations:
pressing the Start PBC button or using PIN Code.
On the side of Vigor 2820 series which served as an AP, p
ON/OFF/WPS button for 2 seconds to wait for client device making network
connection through WPS o
side of a station with network card installed, press Start PBC button of network card.
Clean all entries in the MAC address list.
r click Start PBC on web configuration interface. On the
217
ress Wireless LAN
Vigor2820 Series User's Guide