Draytek Vigor2820 Series User Manual page 149

Index
WAN Interface
Domain Name
Active
View Log
Force Update
3. Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered hostname:
hostname and domain name suffix: dyndns.org in the Domain Name block. The
following two blocks should be typed your account Login Name: test and Password: test.
Enable Dynamic DNS
Account
WAN Interface
Service Provider
Service Type
Domain Name
Login Name
Password
Wildcard and Backup The Wildcard and Backup MX features are not supported for
Click the number below Index to access into the setting
page of DDNS setup to set account(s).
Display the WAN interface used.
Display the domain name that you set on the setting page
of DDNS setup.
Display if this account is active or inactive.
Display DDNS log status.
Force the router updates its information to DDNS server.
Check this box to enable the current account. If you did check
the box, you will see a check mark appeared on the Active
column of the previous web page in step 2).
WAN1/WAN2 First - While connecting, the router will use
WAN1/WAN2 as the first channel for such account. If
WAN1/WAN2 fails, the router will use another WAN
interface instead.
WAN1/WAN2 Only - While connecting, the router will use
WAN1/WAN2 as the only channel for such account.
Select the service provider for the DDNS account.
Select a service type (Dynamic, Custom or Static). If you
choose Custom, you can modify the domain that is chosen in
the Domain Name field.
Type in one domain name that you applied previously. Use
the drop down list to choose the desired domain.
Type in the login name that you set for applying domain.
Type in the password that you set for applying domain.
139
Vigor2820 Series User's Guide