Usb Application; Usb General Settings - Draytek Vigor2820 Series User Manual

3 . 1 4 U S B A p p
3 . 1 4 U S B A p p
USB disk can be regarded as an FTP server. By way of Vigor router, clients on LAN can
access, write and read data stored in USB disk. After setting the configuration in USB
Application, you can type the IP address of the Vigor router and username/password created
in USB Application>>USB User Management on the FTP client software. Thus, the client
can use the FTP site (USB disk) through Vigor router.
3 . 1 4 . 1 U S B G
3 . 1 4 . 1 U S B G
This page will determine the number of concurrent FTP connection and default charset for
FTP server. At present, the Vigor router can support USB disk with versions of FAT16 and
FAT32 only. Therefore, before connecting the USB disk into the Vigor router, please make
sure the memory format for the USB disk is FAT16 or FAT32. It is recommended for you to
use FAT32 for viewing the filename completely (FAT16 cannot support long filename).
General Settings
l i c a t i o n
l i c a t i o n
e n e r a l S e t t i n g s
e n e r a l S e t t i n g s
Simultaneous FTP Connections - This field is used to
specify the quantity of the FTP sessions. The router allows
up to 6 FTP sessions connecting to USB storage disk at one
time.
Default Charset - At present, Vigor router supports three
types of character sets: default, GB2312 and BIG5.
227
Vigor2820 Series User's Guide