Draytek Vigor2820 Series User Manual page 55

PPPoE Pass-through
ISDN Dial Backup
Setup
provided by ISP.
Protocol - Drop down the list to choose the one provided by ISP.
If you have already used Quick Start Wizard to set the protocol,
then it is not necessary for you to change any settings in this group.
Modulation –Default setting is Multimode. Choose the one that fits
the requirement of your router.
The router offers PPPoE dial-up connection. Besides, you also can
establish the PPPoE connection directly from local clients to your
ISP via the Vigor router. When PPPoA protocol is selected, the
PPPoE package transmitted by PC will be transformed into PPPoA
package and sent to WAN server. Thus, the PC can access Internet
through such direction.
For Wired LAN – If you check this box, PCs on the same network
can use another set of PPPoE session (different with the Host PC)
to access into Internet.
For Wireless LAN – If you check this box, PCs on the same
wireless network can use another set of PPPoE session (different
with the Host PC) to access into Internet.
VLAN Enable - Enable the function of VLAN with tag. The router
will add specific VLAN number to all packets while sending them
out. Please type the tag value and specify the priority for the
packets sending by the router.
VID– Type the value as the VLAN ID number. The range is form 0
to 4095.
Priority – Type the packet priority number for such VLAN. The
range is from 0 to 7.
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first. Please click ISDN > Dialing to a
Single ISP to create the backup profile.
None - Disable the backup function.
Packet Trigger -The backup line is not on until a packet from a
local host triggers the router to establish a connection.
Always On - If the broadband connection is no longer available,
the backup line will be activated automatically and always on until
45
Vigor2820 Series User's Guide