Draytek Vigor2820 Series User Manual page 137

To activate the function of limit session, simply click Enable and set the default session limit.
Enable
Disable
Default session limit
Limitation List
Start IP
End IP
Maximum Sessions
Add
Edit
Delete
Index (1-15) in Schedule
Setup
Click this button to activate the function of limit session.
Click this button to close the function of limit session.
Defines the default session number used for each computer in
LAN.
Displays a list of specific limitations that you set on this web
page.
Defines the start IP address for limit session.
Defines the end IP address for limit session.
Defines the available session number for each host in the specific
range of IP addresses. If you do not set the session number in this
field, the system will use the default session limit for the specific
limitation you set for each index.
Adds the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
Remove the selected settings existing on the limitation list.
You can type in four sets of time schedule for your request. All
the schedules can be set previously in Application >> Schedule
web page and you can use the number that you have set in that
web page.
127
Vigor2820 Series User's Guide